IF YOU HAVE ANY QUESTIONS. WE SPEAK ENGLISH OR SPANISH. Determine why the original engine failure occurred and make appropriate repairs. Insure this engine is the same application as the one being replaced. Clear all computer diagnostics codes from the vehicle prior to installing.
Inspect and replace gaskets & seals (front seal, rear main seal, valve cover gaskets, oil pan gaskets). Shaft bolts that are drilled through sealant must be applied to avoid leaks. Install new thermostat & gaskets.
Remove all cap-plugs and orifice covers. Replace hoses, clamps & belts. Manifold, flywheel housing, flywheel, flywheel bolts, sensors. Disable fuel/ignition before attempting to start engine. This will allow the oil to prime as.Replace engine oil, oil filter, air filter, fuel filters, coolant- antifreeze if necessary. If equipped with an engine oil cooler the radiator or external cooler must be replaced. Insure the cooling system is flushed and functioning properly. Cooling Systemj fans fail to cycle properly and melts heat indicator tab. Failure to replace engine oil cooler or integral oil cooler in radiator.
Failure instal engine oil prior to starting. Failure remove all cap-plugs from hose orifices. Failure to replace the thermostat and water pump. Failure to repair the cause of the original engine failure.
This may result in lost bolts, sensors, and/or. Completely drain all oil and fluids from unit. Re-use cap-plugs from replacement engine and install on core in same location to avoid. The equipment will be checked and inspected.
The equipment will be replace for another of the same specifications. The item "2001 DETROIT DIESEL SERIES 60 12.7 ENGINE DDC4" is in sale since Monday, August 19, 2019. This item is in the category "eBay Motors\Parts & Accessories\Commercial Truck Parts\Engines & Components\Motor Mounts". The seller is "aragon0827" and is located in Miami, Florida. This item can be shipped to United States.